SC Series Hydro Tek Hot Water Skid 5.5@3500 #SC35006HG
Detectable amount of chemicals known to the State of California to cause cancer, birth defects or other reproductive harm may be found in pressure washing equipment, accessories and exhaust. For More Information Visit www.p65warnings.ca.gov
SC Series Hydro Tek Hot Water Skid #SC35006HG
110v 5.5gpm @ 3500 psi, 250 degrees, GX630 Honda Engine, General Pump
The SC Series skid is a total self-contained high output hot pressure washer with serious, industrial cleaning power. It is designed to withstand daily use by professionals who rely on its dependability and cleaning speed top make a living. The SC Series pressure washer includes a super high output burner with extended fuel capacities and a 3.0 KW generator with 115v auxiliary power outlets that are perfect for lights or other optional equipment like our wash water recovery systems or water recycling systems. Its high impact cleaning power, rugged stainless steel construction, and Pro-Tect-It frame enable it to handle huge cleaning tasks with ease and without the need for an outside power source. The SC pressure washer has proven itself time and time again in commercial and industrial applications, so whether you are cleaning ships, heavy equipment, buildings or concrete - the SC will be on hand, giving you the power to get the job done right.
Rugged “Pro-tect-it” Frame
Hydro Tek’s unique “Pro-tect-it” frame of 1¼”, heavy-gauge steel, with durable electrostatically applied powder coat finish.
Stainless Steel Panels
These rugged and durable panels offer lifetime corrosion resistance and protection of your valuable investment from the harshest environments. Keeps your machine looking like new for years to come.
SpiraLast™ Coil and Heating System
A 110v oil fired burner is paired with the Hydro Tek manufactured SpiraLast™ heating coil for an efficient heating system. Robotically fused ½” schedule 80 steel pipe is cold rolled to protect the steel pipe from fatigue and the spiral coil is then surrounded by ceramic insulation and stainless enclosure with double-wall end caps. Check out our lifetime coil warranty.
Efficient OHV gas engines with electric key start, low oil shutdown, and cast iron cylinder for maximum duty and performance. Some models equipped with a durable, water-cooled diesel engine with key-switch shutdown, for enhanced longevity and single fuel source.
Heavy Duty “roto-molded” rust free fuel tanks with fuel filter to protect against contaminated fuel. Extended run time (up to 8hrs.) eliminates interruptions. High capacity 8-gallon gas and 18-gallon diesel fuel tank decrease refueling and operator downtime.
Total Relief Unloader - Remote Mounted
Flow sensitive unloader allows pressure to build up gradually as trigger gun is activated eliminating “pressure spikes” and improving operator control and safety. When the gun is released, entire system pressure is relieved, enhancing system life and eliminating engine starting problems. The unloader is panel mounted eliminating heat failure and vibration. Balanced regulating unloader on 2-gun and 4000psi systems.
NEMA4- Water Tight Control Panel
ETL certified to UL1776 Class 2, for use in wash-down area, exceeding Industry standards. Special Hydro Tek control box features easy to use controls and provides instant access to electronics. (SC36004D12Q n/a)
2 Gun Compatible
Allows the operator to operate two pressure guns simultaneously, creating a multi-purpose machine, increasing efficiency and time. Unique split flow design balances pressure spikes. The adjustable flow feature also allows the operator to conserve water when needed
110v Diesel Fired Burner with On-Board 3000 watt Generator
Provides automatic, high-intensity ignition and reliable power for the heating system. Supplemental power outlets from the generator (GFCI Protected) offer the operator additional electrical power to run lights or accessories. (D12 models have an efficient 12V burner system that offers an economical alternative and still provides maximum burner performance - not compatible with auxiliary accessories)
Belt Driven Pump
High torque, V-belt driven pump, low RPM, cooler and quieter operation for continuous duty performance.
More Standard Features
- Burst disc technology for operator safety
- Adjustable thermostat
- Heavy-duty gun and wand with nozzle storage and 50’ hose
- Insulated quick couplers & 3 or more nozzles
- Hour meters are included on all diesel models
*PRICING TOO LOW TO ADVERTISE ONLINE, JUST CALL IN 855-351-9274
Hydro Tek SC Series Specs
|SC30004VG||3000||4.0||250° F||479||Vanguard Gas|
|SC30006VH||3000||5.5||250° F||570||Vanguard Gas|
|SC30008HG*||3000||7.8||200° F||688||GX630 Honda Gas|
|SC30009KAF**||3000||8.5/2||200° F||725||Kohler Gas|
|SC35005VH||3500||4.8||250° F||570||Vanguard Gas|
|SC35005VG||3500||4.7||250° F||570||Vanguard Gas|
|SC35005VC||3500||4.5||250° F||570||Vanguard Gas|
|SC35006VG||3500||5.5||250° F||627||Vanguard Gas|
|SC35006HG||3500||5.5||250° F||688||GX630 Honda Gas|
|SC35008HAF**||3500||7.7/2||200° F||688||GX690 Honda Gas|
|SC35008KAF**||3500||7.7/2||200° F||725||Kohler Gas|
* Two gun system compatible
** Includes two guns, wands, hoses