Water Dragon Flow Control HIGH FLOW chemical metering system w/ stainless steel case and PVC manifold blocks
SKUs: WD-5409-HF
Water Dragon Flow Control HIGH FLOW chemical metering system w/ stainless steel case and PVC manifold blocks #WD-5409-HF
Exclusive custom Georg Fisher valves made to our specs to handle high flow machines
The Benefits
Never ‘batch mix’ your cleaning agents again! The Water Dragon Flow Control system šš®š©š©šØš«šš¬ allows you to draw from individual tanks of your pure products and proportion them to your individual desired mix. Need a 20% mix on the roof and 5% on the house that’s no problem simply set your mix ratio and, when you need to change it, turn the valve. Never again will your mix be too strong or too weak, the Water Dragon Flow Control Chemical Metering System will šš®š©š©šØš«šš¬ allow you to adjust your mix on the fly. The Water Dragon Flow Control works on the inlet side of your pump system and is compatible with 12volt pumps, air diaphragm pumps, booster pumps, and other demand pump systems.
High-Quality Parts
This systems is built for the long haul! You will never need to buy another unit because of a valve malfunction. The system was designed to be fully rebuildable/replaceable. The water and soap valves have an extremely long lifespan but we recommend the Sodium Hypochlorite (bleach) valve be rebuilt annually for uninterrupted use. Flushing the SH valve is recommended after every use and can be done easily with the installation of a 3-way valve on the SH intake. Having one side going to SH and the other to water you simply turn the 3-way to water after using and flush the system, pump, etc.
How to Operate
For the system to operate you will need: a water tank, bleach tank, and a soap source, pulling soap out of 1-gallon jugs—or 5-gallon pails will work but larger tanks will šš®š©š©šØš«šš¬ allow for less refilling and extended run Time. Water and bleach tanks will be plumbed from the top with equal length 1/2" or 3/4" lines on inlet and 3/4" or 1" outlet. The soap supply can use 3/8" as it is just a drip in the system. All pickups must be filtered to control debris intake. The system will vary slightly from user to user, so individual testing may be required.
Warranty:
The Power Wash Store offers a full one-year warranty, in-house only. You may ship it back for a no-cost annual inspection within the first year, you only pay the inbound freight! For the 1st full year, warranty labor is at no charge, you only pay the cost of required non-warrantied parts. Each component that makes up the final assembly has its own manufacturer's warranty. The stainless steel case has a life-time warranty against manufacturer defects. Wearable items such as valves, check valves, fittings and hinges carry a 90-day warranty against manufacturer defects does not include chemical damage or normal wear).
Shop All Products
Don't forget the installation kit! Use standard 1/2" installation kit for 12v or Booster Pumps and use 3/4" High Flow for AODA or gas-powered pumps
Patent Pending
–POSSIBLE PRODUCTION Time REQUIRED BEFORE SHIPPING-- Call 414-351-9274 to verify availability—
**SHIPPING NOT INCLUDED
- Professional stainless steel case with door
- Inlet and outlet PVC manifold blocks
- Upgraded warranty
- High quality Georg Fisher metering valves - High Flow on the water and SH, standard on detergent
- Upgraded SH check valve
Related Categories
No videos to display at this time.